Planet/1200Mbps Dual Band 802.11ac Outdoor Wireless AP (IP68,802.3at PoE+, 4 x N-Type connector)
Ultra High Speed and Wide Coverage.;
PLANET WDAP-802AC 1200Mbps Dual Band 802.11ac Outdoor Wireless AP offer a wide coverage of wireless Internet access and ultimate wireless speed. It comes with the IP68-rated aluminum case protected from contact with harmful dust and immersion in water. It adopts the latest IEEE 802.11ac 2T2R dual-band technology and provides 2.4GHz and 5GHz dual radios with maximum connectivity and performance for long-range coverage. By connecting high-gain antenna through the flexible N-type connectors, the system integrator can easily assist customers in achieving various outdoor long-distance applications under rough weather in any harsh environment.;
Flexible, Durable and Reliable Outdoor Characteristics.;
To reach maximum reliability in the harsh environment, the WDAP-802AC not only comes with IP68-rated Aluminum Die-cast Housing, but also adopts the enterprise-level Qualcomm kernel, capable of withstanding wide temperature ranging from -40 to 70 degrees C. Designed with the IEEE 802.3at PoE+ (Power over Ethernet) power scheme, the WDAP-802AC can be easily installed in the areas where power outlets are not available. Furthermore, it is also suitable to be integrated with PLANET Solar Power PoE System to offer farther wireless service in remote areas.
Central Management Simplifies High-density Deployment;
For wireless deployment in high-density environments such as campuses, communities, warehouses, etc., the dual-radio design and coverage threshold make the WDAP-802AC capable of utilizing dual band to relay signal and limit specific clients so as to provide maximum bandwidth to those authenticated users. Moreover, you can simply install our software controller, PLANET SAPC (Smart AP Control), to deliver wireless profiles to multiple APs simultaneously, thus making the central management simple.
Multiple SSIDs with VLAN Tagging;
In the aspect of security, the WDAP-802AC supports WPA/ WPA2, and the 802.1X RADIUS authentication to secure the wireless connection. Besides, the supported IEEE 802.1Q VLAN allows multiple VLAN tags to be mapped to multiple SSIDs to distinguish the wireless access. This makes it possible for the WDAP-802AC to work with managed Ethernet switches to have VLANs assigned for a different access level and authority.
More User-friendly, Higher Efficiency and Better Experience;
The WDAP-802AC is designed to reduce the difficulty of the outdoor configuration and optimize user experience. With the graphical Web GUI and setup wizard assisting administrator quickly in configuring suitable operation modes for various applications, the built-in Wi-Fi analyzer provides real-time channel utilization to prevent channel occupation among APs. With the automatic transmission power mechanism, distance control and scheduling reboot setting, the WDAP-802AC is easier for administrator to deploy and manage without on-site maintenance.
Key Features:
Industrial Wireless LAN and LAN:
Compliant with the IEEE 802.11a/b/g/n/ac wireless technology.
802.11ac 2T2R MIMO architecture with data rate of up to 1200Mbps (300Mbps at 2.4GHz and 867Mbps at 5GHz).
Equipped with 10/100/1000Mbps RJ45 port with auto MDI/MDI-X supported.
RF Interface Characteristics:
Built-in four N-type antenna connectors.
High output power with multiply-adjustable transmit power control.
Outdoor Environmental Characteristics:
IP68 rating, IEEE 802.3at PoE design
Rugged protection with aluminum extrusion case and ground terminal
Operating temperature: -40~70 degrees C
Multiple Operation Modes and Wireless Features:
Multiple operation modes: AP, Gateway, Repeater, WDS, WISP.
WMM (Wi-Fi multimedia) provides higher priority to multimedia transmitting over wireless.
Coverage threshold to limit the weak signal of clients occupying session.
Real-time Wi-Fi channel analysis chart and client limit control for better performance.
Secure Network Connection:
Full encryption supported: 64-/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK and 802.1X RADIUS authentication.
Supports 802.1Q VLAN and SSID-to-VLAN mapping.
Supports IP/Port/MAC address/URL filtering, DoS, SPI Firewall.
Supports DMZ and Port forwarding.
Bandwidth control per IP address to increase network stability.
Easy Deployment and Management:
Supports PLANET AP Controllers in AP mode.
Easy discovery by PLANET Smart Discovery.
Self-healing mechanism through system auto reboot setting.
System status monitoring through remote Syslog Server.
Supports PLANET DDNS/ Easy DDNS.
Hardware | |
---|---|
Standard Support | IEEE 802.11ac IEEE 802.11n IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11i IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3x flow control |
Material | Aluminum |
Dimensions (W x D x H) | 225 x 23.2 x 225mm |
Weight | 4kg |
Power Requirements | 48V DC IN,0.5A, IEEE 802.3af/at PoE+ |
Power Consumption (max.) | < 25.5W |
Mounting Type | Mast mounting |
Interface | Wireless IEEE802.11a/b/g/n/ac, 2T2R PoE LAN: 1 x 10/100/1000BASE-T, auto-MDI/MDIX, 802.3at PoE In |
Button | Reset button (Inside enclosure) |
Antenna | Built-in four N-type connectors (female) |
Data Rate | IEEE 802.11b: up to 11Mbps IEEE 802.11a/g: up to 54Mbps IEEE 802.11n (20MHz): up to 150Mbps IEEE 802.11n (40MHz): up to 300Mbps 802.11ac (VHT20): Up to 173.3Mbps 802.11ac (VHT40): Up to 400Mbps 802.11ac (VHT80): Up to 867Mbps |
Media Access Control | CSMA/CA |
Modulation | 802.11ac: OFDM (BPSK/ QPSK/ 16QAM/ 64QAM/ 256QAM) 802.11a/g/n: OFDM (BPSK/ QPSK/ 16QAM/ 64QAM) 802.11b: DSSS (DBPSK/ DQPSK/ CCK) |
Frequency Band | 2.4GHz: FCC: 2.412~2.462GHz ETSI: 2.412~2.472GHz 5GHz: FCC: 5.180~5.240GHz, 5.745~5.825GHz ETSI: 5.180~5.700GHz |
Operating Channels | 2.4GHz: FCC: 1~11 Channels ETSI: 1~13 Channels 5GHz: FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165 (9 Channels) ETSI: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140 (16 Channels) *5GHz channel list may vary in different countries depending on their regulations. |
Max. Transmit Power (dBm) | FCC : up to 29 ± 1dBm ETSI : < 20dBm (EIRP) |
Receiver Sensitivity (dBm) | 2.4GHz: 802.11b(1Mbps):-99dBm 802.11b(11Mbps):-92dBm 802.11g(6Mbps):-95dBm 802.11g(54Mbps):-82dBm 802.11n HT20(MCS0/MCS8):-95dBm 802.11n HT20(MCS7/MCS15):-77dBm 802.11n HT40(MCS0/MCS8):-93dBm 802.11n HT40(MCS7/MCS15):-75dBm 5GHz: 802.11a(6Mbps):-92dBm 802.11a(54Mbps):-75dBm 802.11n HT20(MCS0/MCS8):-91dBm 802.11n HT20(MCS7/MCS15):-72dBm 802.11n HT40(MCS0/MCS8):-88dBm 802.11n HT40(MCS7/MCS15):-70dBm 802.11ac VHT20(MCS0):-92dBm 802.11ac VHT2(MCS8):-70dBm 802.11ac VHT40(MCS0):-89dBm 802.11ac VHT40(MCS9):-65dBm 802.11ac VHT80(MCS0):-87dBm 802.11ac VHT80(MCS9):-61dBm |
Environment & Certification | |
Operating Temperature | -40~70 degrees C |
Operating Humidity | 10~90% (non-condensing) |
IP Level | IP68 |
ESD Protection | ±8kV air gap discharge ±4kV contact discharge |
Surge Protection | ±4kV |
Regulatory | CE, RoHS |
Software | |
LAN | Static IP Supports IP-MAC binding |
WAN Type (GW/WISP mode) | ■ Static IP ■ Dynamic IP ■ PPPoE |
Wireless Modes | ■ Access Point ■ Gateway ■ Repeater ■ WDS (PtP/PtMP) ■ WISP |
Channel Width | 20MHz, 40MHz, 80MHz |
Encryption Type | 64-/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X |
Wireless Security | Enable/Disable SSID Broadcast Wireless MAC address filtering User Isolation |
Max. SSIDs | 4 |
Max. Wireless Clients | 64 per radio (50 is suggested, depending on usage) |
Max. WDS Peers | 4 |
Wireless QoS | Supports Wi-Fi Multimedia (WMM) |
Wireless Advanced | Auto channel selection 5-level transmit power control (100%, 75%, 50%, 25% and 12.5%) Client limit control, coverage threshold Distance control (Auto Ack Timeout) Wi-Fi channel analysis chart |
Status Monitoring | Device status, wireless client List PLANET Smart Discovery DHCP client table System Log supports remote syslog server |
VLAN | IEEE 802.1Q VLAN (VID: 3~4094) SSID-to-VLAN mapping up to 4 SSIDs |
Self-healing | Supports auto reboot settings per day/hour |
Management | Remote management through PLANET DDNS/ Easy DDNS Configuration backup and restore Supports UPnP Supports IGMP Proxy Supports PPTP/L2TP/IPSec VPN Pass-through SNMP v1/v2c/v3 support, MIB I/II, Private MIB |
Central Management | Applicable controllers: WAPC-500, WAPC-1000 and Smart AP Control(SAPC) |
Hardware | |
---|---|
Standard Support | IEEE 802.11ac IEEE 802.11n IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11i IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3x flow control |
Material | Aluminum |
Dimensions (W x D x H) | 225 x 23.2 x 225mm |
Weight | 4kg |
Power Requirements | 48V DC IN,0.5A, IEEE 802.3af/at PoE+ |
Power Consumption (max.) | < 25.5W |
Mounting Type | Mast mounting |
Interface | Wireless IEEE802.11a/b/g/n/ac, 2T2R PoE LAN: 1 x 10/100/1000BASE-T, auto-MDI/MDIX, 802.3at PoE In |
Button | Reset button (Inside enclosure) |
Antenna | Built-in four N-type connectors (female) |
Data Rate | IEEE 802.11b: up to 11Mbps IEEE 802.11a/g: up to 54Mbps IEEE 802.11n (20MHz): up to 150Mbps IEEE 802.11n (40MHz): up to 300Mbps 802.11ac (VHT20): Up to 173.3Mbps 802.11ac (VHT40): Up to 400Mbps 802.11ac (VHT80): Up to 867Mbps |
Media Access Control | CSMA/CA |
Modulation | 802.11ac: OFDM (BPSK/ QPSK/ 16QAM/ 64QAM/ 256QAM) 802.11a/g/n: OFDM (BPSK/ QPSK/ 16QAM/ 64QAM) 802.11b: DSSS (DBPSK/ DQPSK/ CCK) |
Frequency Band | 2.4GHz: FCC: 2.412~2.462GHz ETSI: 2.412~2.472GHz 5GHz: FCC: 5.180~5.240GHz, 5.745~5.825GHz ETSI: 5.180~5.700GHz |
Operating Channels | 2.4GHz: FCC: 1~11 Channels ETSI: 1~13 Channels 5GHz: FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165 (9 Channels) ETSI: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140 (16 Channels) *5GHz channel list may vary in different countries depending on their regulations. |
Max. Transmit Power (dBm) | FCC : up to 29 ± 1dBm ETSI : < 20dBm (EIRP) |
Receiver Sensitivity (dBm) | 2.4GHz: 802.11b(1Mbps):-99dBm 802.11b(11Mbps):-92dBm 802.11g(6Mbps):-95dBm 802.11g(54Mbps):-82dBm 802.11n HT20(MCS0/MCS8):-95dBm 802.11n HT20(MCS7/MCS15):-77dBm 802.11n HT40(MCS0/MCS8):-93dBm 802.11n HT40(MCS7/MCS15):-75dBm 5GHz: 802.11a(6Mbps):-92dBm 802.11a(54Mbps):-75dBm 802.11n HT20(MCS0/MCS8):-91dBm 802.11n HT20(MCS7/MCS15):-72dBm 802.11n HT40(MCS0/MCS8):-88dBm 802.11n HT40(MCS7/MCS15):-70dBm 802.11ac VHT20(MCS0):-92dBm 802.11ac VHT2(MCS8):-70dBm 802.11ac VHT40(MCS0):-89dBm 802.11ac VHT40(MCS9):-65dBm 802.11ac VHT80(MCS0):-87dBm 802.11ac VHT80(MCS9):-61dBm |
Environment & Certification | |
Operating Temperature | -40~70 degrees C |
Operating Humidity | 10~90% (non-condensing) |
IP Level | IP68 |
ESD Protection | ±8kV air gap discharge ±4kV contact discharge |
Surge Protection | ±4kV |
Regulatory | CE, RoHS |
Software | |
LAN | Static IP Supports IP-MAC binding |
WAN Type (GW/WISP mode) | ■ Static IP ■ Dynamic IP ■ PPPoE |
Wireless Modes | ■ Access Point ■ Gateway ■ Repeater ■ WDS (PtP/PtMP) ■ WISP |
Channel Width | 20MHz, 40MHz, 80MHz |
Encryption Type | 64-/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X |
Wireless Security | Enable/Disable SSID Broadcast Wireless MAC address filtering User Isolation |
Max. SSIDs | 4 |
Max. Wireless Clients | 64 per radio (50 is suggested, depending on usage) |
Max. WDS Peers | 4 |
Wireless QoS | Supports Wi-Fi Multimedia (WMM) |
Wireless Advanced | Auto channel selection 5-level transmit power control (100%, 75%, 50%, 25% and 12.5%) Client limit control, coverage threshold Distance control (Auto Ack Timeout) Wi-Fi channel analysis chart |
Status Monitoring | Device status, wireless client List PLANET Smart Discovery DHCP client table System Log supports remote syslog server |
VLAN | IEEE 802.1Q VLAN (VID: 3~4094) SSID-to-VLAN mapping up to 4 SSIDs |
Self-healing | Supports auto reboot settings per day/hour |
Management | Remote management through PLANET DDNS/ Easy DDNS Configuration backup and restore Supports UPnP Supports IGMP Proxy Supports PPTP/L2TP/IPSec VPN Pass-through SNMP v1/v2c/v3 support, MIB I/II, Private MIB |
Central Management | Applicable controllers: WAPC-500, WAPC-1000 and Smart AP Control(SAPC) |