Industrial Ethernet/4 Port/Advanced POE - Planet IGS-624HPT.
Interface
4 10/100/1000BASE-T Gigabit Ethernet RJ45 copper ports
Two SFP slots, supporting 1000BASE-X and 100BASE-FX transceiver in dual modes (auto detection)
Power over Ethernet
Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
Backward compatible with IEEE 802.3af Power over Ethernet
Up to 4 ports of IEEE 802.3af/at devices powered
Up to 120-watt PoE budget
Supports PoE power up to 36 watts for each PoE port
Each port supports 54V DC power to PoE powered device
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100m
Layer 2 Switching
Features Store-and-Forward mode with wire-speed filtering and forwarding rates
IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
4K MAC address table size
9K jumbo frame
IEEE 802.1Q VLAN transparency
Automatic address learning and address aging
Supports CSMA/CD protocol
Industrial Case and Installation
IP40 metal case
DIP switch for switch or redundant mode selection
4 real-time PoE power usage indicators
DIN-rail, wall-mount or side wall-mount design
12~56V DC redundant power with reverse polarity protection
Fault alarm for power input failed
Supports 6KV DC Ethernet ESD protection
-40 to 75 degrees C operating temperature
Hardware Specifications | |
---|---|
Copper Ports | 4 10/100/1000BASET RJ45 auto-MDI/MDI-X ports |
PoE Injector Ports | Four ports with 802.3at PoE+ injector function (Port-1 to Port-4) |
SFP Slots (Auto Detection) | Two 1000BASE-SX/LX/BX SFP interface (Port 5 to Port 6) Compatible with 100BASE-FX SFP |
DIP Switch | Switch (default)/fiber redundant mode |
Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
Alarm | Provides one relay output for power failure Alarm relay current carry ability: 1A @ 24V DC |
Power Requirements | 12~56V DC, 7A (max.) Redundant power with reverse polarity protection |
Power Consumption | Max. 7.02 watts/24BTU (Ethernet Full Loading) Max. 130.6 watts/445BTU (Ethernet + PoE Full Loading) |
Dimensions (W x D x H) | 32 x 87 x 135 mm |
Weight | 657g |
Enclosure | IP40 metal case |
Installation | DIN-rail kit and wall-mount kit |
ESD Protection | 6KV |
Switch Specifications | |
Switch Architecture | Store-and-Forward |
Switch Fabric | 12Gbps |
Throughput (packet per second) | 8.93Mpps@64bytes |
Address Table | 4K entries |
Buffer Memory | 1M bits on-chip buffer memory |
Jumbo Frame | 9Kbytes |
Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
Power over Ethernet | |
PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type | End-span |
Power Pin Assignment | 1/2(+), 3/6(-) |
PoE Power Output | IEEE 802.3af Standard - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard - Per port 51V~56V DC (depending on the power supply), max. 36 watts |
PoE Power Budget (max.) | 60W@12V DC input 90W@24V DC input 120W@48V-56V DC input |
Max. Number of Class 4 PDs | 4 |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3az Gigabit SX/LX IEEE 802.3x Full-Duplex Flow Control IEEE 802.3at Power over Ethernet Plus PSE IEEE 802.3af Power over Ethernet Plus IEEE 802.1p Class of Service |
Environment | |
Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
Humidity | Operating: 5~90% (non-condensing) Storage: 5~90% (non-condensing) |
Hardware Specifications | |
---|---|
Copper Ports | 4 10/100/1000BASET RJ45 auto-MDI/MDI-X ports |
PoE Injector Ports | Four ports with 802.3at PoE+ injector function (Port-1 to Port-4) |
SFP Slots (Auto Detection) | Two 1000BASE-SX/LX/BX SFP interface (Port 5 to Port 6) Compatible with 100BASE-FX SFP |
DIP Switch | Switch (default)/fiber redundant mode |
Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
Alarm | Provides one relay output for power failure Alarm relay current carry ability: 1A @ 24V DC |
Power Requirements | 12~56V DC, 7A (max.) Redundant power with reverse polarity protection |
Power Consumption | Max. 7.02 watts/24BTU (Ethernet Full Loading) Max. 130.6 watts/445BTU (Ethernet + PoE Full Loading) |
Dimensions (W x D x H) | 32 x 87 x 135 mm |
Weight | 657g |
Enclosure | IP40 metal case |
Installation | DIN-rail kit and wall-mount kit |
ESD Protection | 6KV |
Switch Specifications | |
Switch Architecture | Store-and-Forward |
Switch Fabric | 12Gbps |
Throughput (packet per second) | 8.93Mpps@64bytes |
Address Table | 4K entries |
Buffer Memory | 1M bits on-chip buffer memory |
Jumbo Frame | 9Kbytes |
Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
Power over Ethernet | |
PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type | End-span |
Power Pin Assignment | 1/2(+), 3/6(-) |
PoE Power Output | IEEE 802.3af Standard - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard - Per port 51V~56V DC (depending on the power supply), max. 36 watts |
PoE Power Budget (max.) | 60W@12V DC input 90W@24V DC input 120W@48V-56V DC input |
Max. Number of Class 4 PDs | 4 |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3az Gigabit SX/LX IEEE 802.3x Full-Duplex Flow Control IEEE 802.3at Power over Ethernet Plus PSE IEEE 802.3af Power over Ethernet Plus IEEE 802.1p Class of Service |
Environment | |
Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
Humidity | Operating: 5~90% (non-condensing) Storage: 5~90% (non-condensing) |