C-Tec CFP 8 Zone Conventional Fire Panel (LPCB Approved) - CFP708-4
LPCB certified to EN54-2/4, C-TEC's CFP 8 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price. Supplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/key switch entry.
A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided. Optional repeaters, relay expansion boards and EN54-13 system compliance devices are also available.
Key Features
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13 compliance from the BSI.
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Two detector zone circuits.
- Four conventional sounder circuits
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- 'Class change' and alert inputs.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure - no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system), optional CFP relay boards and optional EN54-13 compliant sounder circuit boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC's ActiV range of conventional fire detectors.
Technical Specifications
Approvals/certifications | Certifed to EN54 Parts 2 & 4 by the LPCB., Certified to EN54-13 by Kiwa Telefication. |
---|---|
Mains supply | |
Mains rated current | |
Internal power supply | |
Total output current limited to | |
Quiescent current | 25mA (mains failed, internal sounder active, PSU & gen fault LED lit) |
Max battery size and type | 2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah. |
No. of detector zone circuits | |
Call point resistor value | |
Max. devices per detector zone | |
No. of conventional sounder circuits | |
EOL resistor value | |
Alarm voltage | |
Max. sounder output current | |
Auxiliary relays | |
Open collector outputs | |
Other outputs | 24V Aux. Power (Protected by a resettable fuse. 100mA min. hold current. Resets when fault removed). |
Auxiliary inputs | |
Engineer (AL3) functions | |
Expansion connections | |
Product dimensions (mm) | |
Construction & finish | |
IP Rating | |
Weight | |
Operating conditions/temperature |
Technical Specifications
Approvals/certifications | Certifed to EN54 Parts 2 & 4 by the LPCB., Certified to EN54-13 by Kiwa Telefication. |
---|---|
Mains supply | |
Mains rated current | |
Internal power supply | |
Total output current limited to | |
Quiescent current | 25mA (mains failed, internal sounder active, PSU & gen fault LED lit) |
Max battery size and type | 2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah. |
No. of detector zone circuits | |
Call point resistor value | |
Max. devices per detector zone | |
No. of conventional sounder circuits | |
EOL resistor value | |
Alarm voltage | |
Max. sounder output current | |
Auxiliary relays | |
Open collector outputs | |
Other outputs | 24V Aux. Power (Protected by a resettable fuse. 100mA min. hold current. Resets when fault removed). |
Auxiliary inputs | |
Engineer (AL3) functions | |
Expansion connections | |
Product dimensions (mm) | |
Construction & finish | |
IP Rating | |
Weight | |
Operating conditions/temperature |