Ajax Wall Switch-Wireless Power Relay with Energy Monitors.
The radio Channel Controller allows to Control Domestic appliances remotely.
It is used to Switch on\off irons, garage Gates, water heaters and heat-insulated floors.
The Device Controls the Electric Power Supply by means of Relay, which closes and opens the Power Supply network.
Operates in 110 V and 220 V Mains. The Meter shows the Power consumption in real time.
It is installed into a recessed Wall Plate and connected to the Internal Power Supply network.
Power relay to control 110/230 V~ power supply remotely,
The device connects directly to the 110 V~/230 V~ source and closes/opens the circuit on command. The relay can handle loads of up to 3 kW, which is enough to connect a very power-hungry device. Thanks to WallSwitch, this feature of the device may become known — it displays power consumption in the Ajax app.
Protects devices against overcurrent and voltage surges.
Operates in bistable or pulse modes.
Allows controlling electricity consumption.
Tech specs
Classification
Radio channel relay unit
Device type
Remote-controlled
Installation method
Into wall plate
Compatibility
Operates with all Ajax hubs, range extenders
Actuating element
Relay
Voltage protection
For 230 V~ mains: maximum — 264 V, minimum — 161 V
For 110 V~ mains: maximum — 126 V, minimum — 77 V
For 110 V~ mains: maximum — 126 V, minimum — 77 V
Relay service life
200,000 switch-ons
Maximum load current
13 A
Maximum current protection
Yes (13 A)
Maximum temperature protection
>65°C
Permissible power
Resistive load at 230 V — up to 3 kW
Resistive load at 110 V — up to 1.5 kW
Resistive load at 110 V — up to 1.5 kW
Electric power meter function
Available
Energy consumption parameter check
Current, voltage, power consumption
Alarm signal delivery time
0.15 s
Power supply
110−230 V±10% 50/60 Hz
Operation modes
Impulse (firmware version 5.54.1.0 or higher. Manufacture date from March 5, 2020)
Bistable
Bistable
Contact state
Normally open
Normally closed
Normally closed
Adjustable pulse duration (firmware version 5.54.1.0 or higher)
1–255 sec
Jeweller radio technology
Communication range with central unit — up to 1,000 m in an open space
Two-way communication between devices
Radio frequency bands:
866.0 – 866.5 MHz
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
(depends on the region of sale)
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector scanning period — 12–300 s
Learn more about Jeweller
Two-way communication between devices
Radio frequency bands:
866.0 – 866.5 MHz
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
(depends on the region of sale)
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector scanning period — 12–300 s
Learn more about Jeweller
Operating temperature range
From 0°С to +64°С
Permissible humidity
Up to 75%
Anti-sabotage
Protection against fraud
Jamming detection
Jamming detection
Protection class of body
IP20
Remote setting and testing
+
Dimensions
39 × 33 × 18 mm
Weight
30 g
Tech specs
Classification
Radio channel relay unit
Device type
Remote-controlled
Installation method
Into wall plate
Compatibility
Operates with all Ajax hubs, range extenders
Actuating element
Relay
Voltage protection
For 230 V~ mains: maximum — 264 V, minimum — 161 V
For 110 V~ mains: maximum — 126 V, minimum — 77 V
For 110 V~ mains: maximum — 126 V, minimum — 77 V
Relay service life
200,000 switch-ons
Maximum load current
13 A
Maximum current protection
Yes (13 A)
Maximum temperature protection
>65°C
Permissible power
Resistive load at 230 V — up to 3 kW
Resistive load at 110 V — up to 1.5 kW
Resistive load at 110 V — up to 1.5 kW
Electric power meter function
Available
Energy consumption parameter check
Current, voltage, power consumption
Alarm signal delivery time
0.15 s
Power supply
110−230 V±10% 50/60 Hz
Operation modes
Impulse (firmware version 5.54.1.0 or higher. Manufacture date from March 5, 2020)
Bistable
Bistable
Contact state
Normally open
Normally closed
Normally closed
Adjustable pulse duration (firmware version 5.54.1.0 or higher)
1–255 sec
Jeweller radio technology
Communication range with central unit — up to 1,000 m in an open space
Two-way communication between devices
Radio frequency bands:
866.0 – 866.5 MHz
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
(depends on the region of sale)
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector scanning period — 12–300 s
Learn more about Jeweller
Two-way communication between devices
Radio frequency bands:
866.0 – 866.5 MHz
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
(depends on the region of sale)
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector scanning period — 12–300 s
Learn more about Jeweller
Operating temperature range
From 0°С to +64°С
Permissible humidity
Up to 75%
Anti-sabotage
Protection against fraud
Jamming detection
Jamming detection
Protection class of body
IP20
Remote setting and testing
+
Dimensions
39 × 33 × 18 mm
Weight
30 g