Simplex/Smoke Detector/Addressable - 4098-9714.
TrueAlarm photoelectric sensors use a stable, pulsed LED light source and a silicon photodiode receiver to deliver consistent and accurate low power smoke sensing. Three user selectable sensitivities for special applications are available for each individual sensor, 0.2%, 0.5%, and 1% per foot. Standard sensitivity is 1.25% to 3.1% per foot. The fire alarm control panel runs an algorithm that can vary the sensitivity for normal applications between 1.25% and 3.1% per foot.
Note: Fixed sensitivity settings higher than 1.0% per foot are not UL268 7th Edition compliant.
The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow.
Features:
Sealed against rear air flow entry.
Interchangeable mounting.
EMI/RFI shielded electronics.
Photoelectric technology sensing.
360° smoke entry for optimum response.
Built-in insect screens.
| Weight | 0.50 lbs |
|---|---|
| Dimensions | 4.875 × 4.875 × 2.125 in |
| Manufacturer | |
| Brand | |
| Condition | |
| Type | |
| Style | |
| Detectable Medium | |
| Detection Method | |
| Programming | |
| Protocol | |
| Voltage | |
| Voltage Range | |
| Series |
| Weight | 0.50 lbs |
|---|---|
| Dimensions | 4.875 × 4.875 × 2.125 in |
| Manufacturer | |
| Brand | |
| Condition | |
| Type | |
| Style | |
| Detectable Medium | |
| Detection Method | |
| Programming | |
| Protocol | |
| Voltage | |
| Voltage Range | |
| Series |