Switch 16 Port/POE - UNV NSW2000-16T2GC-POE.
This is an 16 Port UNV PoE Switch made with High Quality Metal Casing.
This PoE Switch can support PoE+ (30w). Paired with UNV brand cameras, extended PoE transmission is available for up to 928 feet of PoE Distance.
Features:
16x 10/100Mbps Ethernet Ports.
2x Gigabit Combo Port (RJ45 & SFP)
All 100mbps ports support PoE.
PoE Complies with IEEE802.3af/at, up to 30w for single port.
Support 250m(928ft) extended PoE transmission when used with UNV IP cameras.
Easy to use, no need to configure.
High Quality Metal Housing.
| Item | Descriptions |
|---|---|
| Ports | 16×10/100Base-TX autosensing Ethernet ports(all support PoE) 2×Gigabit combo ports (RJ45 and SFP) |
| Port attribute | 10/100/1000Mbit/s transfer rate Half-duplex, full-duplex and auto-negotiation Auto MDI/MDIX |
| Standards | IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X ANSI/IEEE 802.3 NWay IEEE 802.3x flow control IEEE 802.3af PoE IEEE 802.3at PoE |
| MAC | 4K |
| Packet Forwarding Rate | 6.55Mbps |
| Switching Capacity | 8.8Gbps |
| EXTEND Mode | Standard: the switch functions as a common un-managed switch and all the ports of the switch can communicate with each other. Extend Mode: If the extend mode is enabled, the transmission distance of both power and data will extend up to 250m(10Mbps), this function can replace the extender and parts of the Fiber. It will extend the distance of the whole system and save the cost of the project. |
| Status LEDs | Link/Act (steady green): link is normal Link/Act (flashing green): data is being forwarded Link/Act (off): no link PoE (steady orange): the port is powering a powered device properly PoE (off): the port is not connected to any powered device or is not supplying power Power (steady green): AC input is normal Power (off): AC input is abnormal |
| PoE | 802.3at/af Max PoE capacity: 250 W |
| Consumption | ≤ 300 W |
| AC Voltage | 100-240 V |
| Operating Temperature | 0°C-40°C (32°F-104°F) |
| Operating Humidity | 10%~85% non-condensing |
| Storage Temperature | -40°C-70°C (-40°F-158°F) |
| Storage Humidity | 10%-90% non-condensing |
| Dimensions (WxDxH) | 440mm×280mm×44mm (17.3"×11"×1.7") |
| Certification | FCC, CE, RoHS |
| Item | Descriptions |
|---|---|
| Ports | 16×10/100Base-TX autosensing Ethernet ports(all support PoE) 2×Gigabit combo ports (RJ45 and SFP) |
| Port attribute | 10/100/1000Mbit/s transfer rate Half-duplex, full-duplex and auto-negotiation Auto MDI/MDIX |
| Standards | IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X ANSI/IEEE 802.3 NWay IEEE 802.3x flow control IEEE 802.3af PoE IEEE 802.3at PoE |
| MAC | 4K |
| Packet Forwarding Rate | 6.55Mbps |
| Switching Capacity | 8.8Gbps |
| EXTEND Mode | Standard: the switch functions as a common un-managed switch and all the ports of the switch can communicate with each other. Extend Mode: If the extend mode is enabled, the transmission distance of both power and data will extend up to 250m(10Mbps), this function can replace the extender and parts of the Fiber. It will extend the distance of the whole system and save the cost of the project. |
| Status LEDs | Link/Act (steady green): link is normal Link/Act (flashing green): data is being forwarded Link/Act (off): no link PoE (steady orange): the port is powering a powered device properly PoE (off): the port is not connected to any powered device or is not supplying power Power (steady green): AC input is normal Power (off): AC input is abnormal |
| PoE | 802.3at/af Max PoE capacity: 250 W |
| Consumption | ≤ 300 W |
| AC Voltage | 100-240 V |
| Operating Temperature | 0°C-40°C (32°F-104°F) |
| Operating Humidity | 10%~85% non-condensing |
| Storage Temperature | -40°C-70°C (-40°F-158°F) |
| Storage Humidity | 10%-90% non-condensing |
| Dimensions (WxDxH) | 440mm×280mm×44mm (17.3"×11"×1.7") |
| Certification | FCC, CE, RoHS |