Industrial 4-Port 10/100/1000T 802.3at PoE + 1-Port 10/100/1000T + 1-Port 100/1000X SFP Gigabit Ethernet Switch - Planet IGS-614HPT.
Features:
Interface:
5 10/100/1000BASE-T Gigabit Ethernet RJ45 copper ports.
One SFP slot, supporting 1000BASE-X and 100BASE-FX transceiver in dual modes .
Power over Ethernet:
Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE.
Backward compatible with IEEE 802.3af Power over Ethernet.
Up to 4 ports of IEEE 802.3af/at devices powered.
Up to 120-watt PoE budget.
Supports PoE power up to 36 watts for each PoE port.
Each port supports 54V DC power to PoE powered device.
Auto detects powered device (PD)
Circuit protection prevents power interference between ports.
Remote power feeding up to 100m.
Layer 2 Switching:
Features Store-and-Forward mode with wire-speed filtering and forwarding rates.
IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation.
2K MAC address table size.
9K jumbo frame.
IEEE 802.1Q VLAN transparency.
Automatic address learning and address aging.
Supports CSMA/CD protocol.
Industrial Case and Installation:
IP40 metal case.
DIN-rail, wall-mount or side wall-mount design.
12~56V DC redundant power with reverse polarity protection.
Fault alarm for power input failed.
Supports 6KV DC Ethernet ESD protection.
-40 to 75 degrees C operating temperature .
4 real-time PoE power usage indicators.
Hardware Specifications | |
---|---|
Copper Ports | 5 10/100/1000BASET RJ45 auto-MDI/MDI-X ports |
PoE Injector Ports | Four ports with 802.3at PoE+ injector function (Port-1 to Port-4) |
SFP Slots | 1 1000BASE-SX/LX/BX SFP interface Compatible with 100BASE-FX SFP |
Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
Power Requirements | 12~56V DC, 7A (max.) Redundant power with reverse polarity protection function |
Power Consumption | Max. 127 watts/433BTU(Ethernet + PoE Full Loading) |
Dimensions(W x D x H) | 50 x 86 x 135 mm |
Weight | 617g |
Enclosure | IP40 metal case |
Installation | DIN-rail kit and wall-mount kit |
ESD Protection | 6KV |
LED | 3 x LED for System and Power: Green: DC Power 1 Green: DC Power 2 Red: Power Alarm 2 x LED for PoE Copper Port (Port-1~Port-4): Green: LNK/ACT (10/100/1000Mbps) Amber: PoE-In-Use 2 x LED for 10/100/1000T Copper Port (Port-5): Green: 1000 LNK/ACT Amber: 10/100 LNK/ACT 2 x LED for 100/1000X SFP Interface (Port-6): Green: 1000 LNK/ACT Amber: 100 LNK/ACT 4 x LED for PoE Power Usage (W) (Low to high): Amber: 30W, 60W, 90W and 120W |
Switch Specifications | |
Switch Architecture | Store-and-Forward |
Switch Fabric | 12Gbps |
Throughput (packet per second) | 8.93Mpps@64bytes |
Address Table | 2K entries |
Buffer Memory | 4M bits on-chip buffer memory |
Jumbo Frame | 9Kbytes |
Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
Power over Ethernet | |
PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type | End-span |
Power Pin Assignment | 1/2(+), 3/6(-) |
PoE Power Output | Per port 54V DC, max. 36 watts |
PoE Power Budget (max.) | 60W@12V DC input 90W@24V DC input 120W@48V-56V DC input |
Max. Number of Class 4 PDs | 4 |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3a Gigabit SX/LX IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE 802.3at Power over Ethernet Plus PSE IEEE 802.3af Power over Ethernet Plus IEEE 802.1p Class of Service |
Environment | |
Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
Humidity | Operating: 5~90% (non-condensing) Storage: 5~90% (non-condensing) |
Hardware Specifications | |
---|---|
Copper Ports | 5 10/100/1000BASET RJ45 auto-MDI/MDI-X ports |
PoE Injector Ports | Four ports with 802.3at PoE+ injector function (Port-1 to Port-4) |
SFP Slots | 1 1000BASE-SX/LX/BX SFP interface Compatible with 100BASE-FX SFP |
Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
Power Requirements | 12~56V DC, 7A (max.) Redundant power with reverse polarity protection function |
Power Consumption | Max. 127 watts/433BTU(Ethernet + PoE Full Loading) |
Dimensions(W x D x H) | 50 x 86 x 135 mm |
Weight | 617g |
Enclosure | IP40 metal case |
Installation | DIN-rail kit and wall-mount kit |
ESD Protection | 6KV |
LED | 3 x LED for System and Power: Green: DC Power 1 Green: DC Power 2 Red: Power Alarm 2 x LED for PoE Copper Port (Port-1~Port-4): Green: LNK/ACT (10/100/1000Mbps) Amber: PoE-In-Use 2 x LED for 10/100/1000T Copper Port (Port-5): Green: 1000 LNK/ACT Amber: 10/100 LNK/ACT 2 x LED for 100/1000X SFP Interface (Port-6): Green: 1000 LNK/ACT Amber: 100 LNK/ACT 4 x LED for PoE Power Usage (W) (Low to high): Amber: 30W, 60W, 90W and 120W |
Switch Specifications | |
Switch Architecture | Store-and-Forward |
Switch Fabric | 12Gbps |
Throughput (packet per second) | 8.93Mpps@64bytes |
Address Table | 2K entries |
Buffer Memory | 4M bits on-chip buffer memory |
Jumbo Frame | 9Kbytes |
Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
Power over Ethernet | |
PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type | End-span |
Power Pin Assignment | 1/2(+), 3/6(-) |
PoE Power Output | Per port 54V DC, max. 36 watts |
PoE Power Budget (max.) | 60W@12V DC input 90W@24V DC input 120W@48V-56V DC input |
Max. Number of Class 4 PDs | 4 |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3a Gigabit SX/LX IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE 802.3at Power over Ethernet Plus PSE IEEE 802.3af Power over Ethernet Plus IEEE 802.1p Class of Service |
Environment | |
Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
Humidity | Operating: 5~90% (non-condensing) Storage: 5~90% (non-condensing) |