10/100/1000Base-T to 1000FX (SFP) Media Converter - Planet GT-805A.
The GT-805A is a 10/100/1000Base-T to 100/1000X (SFP) Media converter,
SFP Media Converter:
Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, the GT-805A media converter support conversion between 10/100/1000BASE-T and 100/1000BASE-X network. There are SFP connectors which allows the distance to be adjustable. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.
Distance Extension with High Performance and Steady Network Communications
PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below:
Enhanced Smart Management Features:
The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function.
LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission.
LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission.
Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network.
Easy Installation
The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss.
Features:
Speed: 10/100/1000TX to 100/1000X SFP
Optical Interface: *SFP module required and sold separately*
Power Consumption: 4.6W / 15BTU (max.)
Power Input: DC 5V/2A
Fiber-Optic Speed: 200Mbps for full-duplex
TAA Compliant
| Hardware Specifications | |
|---|---|
| Hardware Version | 6 |
| Ports | 1 x 10/100/1000BASE-T port: GT-802/GT-802S/GT-802S40/GT-802S60/GT-805A/GT-806A15/GT-806B15/GT-806A40/GT-806B40/ GT-806A60/GT-806B60 1 x 1000BASE-SX SC port: GT-802 1 x 1000BASE-LX SC port: GT-802S/GT-802S40/GT-802S60 1 x 100/1000BASE-X SFP port: GT-805A 1 x 1000BASE-BX SC port: GT-806A15/GT-806B15/GT-806A40/GT-806B40/GT-806A60/GT-806B60 |
| Copper Interface | RJ45 port (auto-MDI/MDI-X) twisted pair |
| Optic Interface | GT-802/GT-802S/GT-802S40/GT-802S60: SC GT-805A: SFP GT-806A15/GT-806B15/GT-806A40/GT-806B40/GT-806A60/GT-806B60: WDM SC |
| Fiber Maximum Distance | GT-802: 220/550m GT-802S: 10km GT-802S40:40km GT-802S60:60km GT-805A: N/A GT-806A15: 15km GT-806B15: 15km GT-806A40: 40km GT-806B40: 40km GT-806A60: 60km GT-806B60: 60km GT-802: 220/550m GT-802S: 10km GT-802S40:40km GT-802S60:60km GT-805A: N/A GT-806A15: 15km GT-806B15: 15km GT-806A40: 40km GT-806B40: 40km GT-806A60: 60km GT-806B60: 60km |
| Optic Wavelength | GT-802: 850nm GT-802S: 1310nm GT-802S40:1310nm GT-802S60:1310nm GT-805A: N/A GT-806A15: TX:1310nm RX:1550nm GT-806B15: TX:1550nm RX:1310nm GT-806A40: TX:1310nm RX:1550nm GT-806B40: TX:1550nm RX:1310nm GT-806A60: TX:1310nm RX:1550nm GT-806B60: TX:1550nm RX:1310nm |
| Max. Optical Launch Power | GT-802: -4dBm GT-802S: -3dBm GT-802S40: -3dBm GT-802S60: -3dBm GT-805A: N/A GT-806A15: -3dBm GT-806B15: -3dBm GT-806A40: +5dBm GT-806B40: +4dBm GT-806A60: +5dBm GT-806B60: +4dBm |
| Min. Optical Launch Power | GT-802: -9.5dBm GT-802S: -9.5dBm GT-802S40: -9.5dBm GT-802S60: -9.5dBm GT-805A: N/A GT-806A15: -9dBm GT-806B15: -9dBm GT-806A40: 0dBm GT-806B40: -1dBm GT-806A60: 0dBm GT-806B60: -1dBm |
| Max. Input Power | GT-802: N/A GT-802S: -3 GT-802S40: -3 GT-802S60: -3 GT-805A: N/A GT-806A15: -3 GT-806B15: -3 GT-806A40: -2 GT-806B40: -2 GT-806A60: -2 GT-806B60: -2 |
| Min. Input Power | GT-802: -18 GT-802S: -20 GT-802S40: -20 GT-802S60: -20 GT-805A: N/A GT-806A15: -21 GT-806B15: -21 GT-806A40: -25 GT-806B40: -25 GT-806A60: -25 GT-806B60: -25 |
| Optical Link Budget | GT-802: 3dB(62.5/125μm) 4dB(50/125μm) GT-802S: 4.9dB GT-802S40: 4.9dB GT-802S60: 4.9dB GT-805A: N/A GT-806A15: 12dB GT-806B15: 12dB GT-806A40: 25dB GT-806B40: 24dB GT-806A60: 25dB GT-806B60: 24dB |
| LED Indicator | PWR TP LINK/ACT, 1000 LINK/ACT Fiber LINK/ACT |
| DIP Switch | LFP function (Disable / Enable) setting |
| Power Consumption | 4.6 watts/15 BTU (maximum) |
| Power Input | DC 5V/2A |
| Dimensions (W x D x H) | 94 x 70 x 26 mm |
| Weight | 0.2kg |
| Converter Specifications | |
| Speed | Twisted-pair: 10/20Mbps for half/full duplex 100/200Mbps for half/full duplex 2000Mbps for full duplex Fiber-optic: 2000Mbps for full duplex 200Mbps for full duplex (GT-805A only) |
| Network Cables | Twisted-pair 10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100m 100BASE-TX: 2-pair UTP Cat. 5, up to 100m 1000BASE-T: 4-pair STP Cat 5 up to 100mFiber-optic Cable 1000BASE-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m/2km. 1000BASE-LX: 9/125μm single-mode cable, providing long distance for 10/20/40/80/120km (vary on SFP module) 100BASE-FX: 50/125μm or 62.5/125μm multi-mode fiber cable for up to 2km (vary on SFP module) 9/125μm single-mode cable for 20/40/60/120km (vary on SFP module) |
| Jumbo Packet Size | 9K |
| Standard Conformance | |
| Standards Compliance | IEEE 802.3, 10BASE-T IEEE 802.3u, 100BASE-TX/100BASE-FX IEEE 802.3ab, 1000BASE-T IEEE 802.3z, 1000BASE-SX/LX IEEE 802.3x Full-duplex flow control |
| Environment | |
| Operating Environment | Operating temperature: 0 to 50 degrees C Humidity: 5~95% non-condensing |
| Storage Environment | Storage temperature: -10 to 70 degrees C Humidity: 5~95% non-condensing |
| Emissions | FCC Class A, CE Class A |
| Hardware Specifications | |
|---|---|
| Hardware Version | 6 |
| Ports | 1 x 10/100/1000BASE-T port: GT-802/GT-802S/GT-802S40/GT-802S60/GT-805A/GT-806A15/GT-806B15/GT-806A40/GT-806B40/ GT-806A60/GT-806B60 1 x 1000BASE-SX SC port: GT-802 1 x 1000BASE-LX SC port: GT-802S/GT-802S40/GT-802S60 1 x 100/1000BASE-X SFP port: GT-805A 1 x 1000BASE-BX SC port: GT-806A15/GT-806B15/GT-806A40/GT-806B40/GT-806A60/GT-806B60 |
| Copper Interface | RJ45 port (auto-MDI/MDI-X) twisted pair |
| Optic Interface | GT-802/GT-802S/GT-802S40/GT-802S60: SC GT-805A: SFP GT-806A15/GT-806B15/GT-806A40/GT-806B40/GT-806A60/GT-806B60: WDM SC |
| Fiber Maximum Distance | GT-802: 220/550m GT-802S: 10km GT-802S40:40km GT-802S60:60km GT-805A: N/A GT-806A15: 15km GT-806B15: 15km GT-806A40: 40km GT-806B40: 40km GT-806A60: 60km GT-806B60: 60km GT-802: 220/550m GT-802S: 10km GT-802S40:40km GT-802S60:60km GT-805A: N/A GT-806A15: 15km GT-806B15: 15km GT-806A40: 40km GT-806B40: 40km GT-806A60: 60km GT-806B60: 60km |
| Optic Wavelength | GT-802: 850nm GT-802S: 1310nm GT-802S40:1310nm GT-802S60:1310nm GT-805A: N/A GT-806A15: TX:1310nm RX:1550nm GT-806B15: TX:1550nm RX:1310nm GT-806A40: TX:1310nm RX:1550nm GT-806B40: TX:1550nm RX:1310nm GT-806A60: TX:1310nm RX:1550nm GT-806B60: TX:1550nm RX:1310nm |
| Max. Optical Launch Power | GT-802: -4dBm GT-802S: -3dBm GT-802S40: -3dBm GT-802S60: -3dBm GT-805A: N/A GT-806A15: -3dBm GT-806B15: -3dBm GT-806A40: +5dBm GT-806B40: +4dBm GT-806A60: +5dBm GT-806B60: +4dBm |
| Min. Optical Launch Power | GT-802: -9.5dBm GT-802S: -9.5dBm GT-802S40: -9.5dBm GT-802S60: -9.5dBm GT-805A: N/A GT-806A15: -9dBm GT-806B15: -9dBm GT-806A40: 0dBm GT-806B40: -1dBm GT-806A60: 0dBm GT-806B60: -1dBm |
| Max. Input Power | GT-802: N/A GT-802S: -3 GT-802S40: -3 GT-802S60: -3 GT-805A: N/A GT-806A15: -3 GT-806B15: -3 GT-806A40: -2 GT-806B40: -2 GT-806A60: -2 GT-806B60: -2 |
| Min. Input Power | GT-802: -18 GT-802S: -20 GT-802S40: -20 GT-802S60: -20 GT-805A: N/A GT-806A15: -21 GT-806B15: -21 GT-806A40: -25 GT-806B40: -25 GT-806A60: -25 GT-806B60: -25 |
| Optical Link Budget | GT-802: 3dB(62.5/125μm) 4dB(50/125μm) GT-802S: 4.9dB GT-802S40: 4.9dB GT-802S60: 4.9dB GT-805A: N/A GT-806A15: 12dB GT-806B15: 12dB GT-806A40: 25dB GT-806B40: 24dB GT-806A60: 25dB GT-806B60: 24dB |
| LED Indicator | PWR TP LINK/ACT, 1000 LINK/ACT Fiber LINK/ACT |
| DIP Switch | LFP function (Disable / Enable) setting |
| Power Consumption | 4.6 watts/15 BTU (maximum) |
| Power Input | DC 5V/2A |
| Dimensions (W x D x H) | 94 x 70 x 26 mm |
| Weight | 0.2kg |
| Converter Specifications | |
| Speed | Twisted-pair: 10/20Mbps for half/full duplex 100/200Mbps for half/full duplex 2000Mbps for full duplex Fiber-optic: 2000Mbps for full duplex 200Mbps for full duplex (GT-805A only) |
| Network Cables | Twisted-pair 10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100m 100BASE-TX: 2-pair UTP Cat. 5, up to 100m 1000BASE-T: 4-pair STP Cat 5 up to 100mFiber-optic Cable 1000BASE-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m/2km. 1000BASE-LX: 9/125μm single-mode cable, providing long distance for 10/20/40/80/120km (vary on SFP module) 100BASE-FX: 50/125μm or 62.5/125μm multi-mode fiber cable for up to 2km (vary on SFP module) 9/125μm single-mode cable for 20/40/60/120km (vary on SFP module) |
| Jumbo Packet Size | 9K |
| Standard Conformance | |
| Standards Compliance | IEEE 802.3, 10BASE-T IEEE 802.3u, 100BASE-TX/100BASE-FX IEEE 802.3ab, 1000BASE-T IEEE 802.3z, 1000BASE-SX/LX IEEE 802.3x Full-duplex flow control |
| Environment | |
| Operating Environment | Operating temperature: 0 to 50 degrees C Humidity: 5~95% non-condensing |
| Storage Environment | Storage temperature: -10 to 70 degrees C Humidity: 5~95% non-condensing |
| Emissions | FCC Class A, CE Class A |