Planet/8 Port Switch/POE - GSD-1008HP.
Features:
Physical Port;
10-port 10/100/1000BASE-T Gigabit Ethernet RJ45 copper
8-port IEEE 802.3af/at PoE Injector (Port-1 to Port-8)
Power over Ethernet;
Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
Up to 8 ports of IEEE 802.3af/802.3at devices powered
Supports PoE power up to 32 watts for each PoE port
Each port supports 54V DC power to PoE powered device
120-watt PoE budget
Auto detects powered device (PD)
Supports PD alive check
Circuit protection prevents power interference between ports
Remote power feeding up to 100m in standard mode with 250m in extended mode
Switching;
Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
Flow control for full duplex operation and back pressure for half duplex operation
Integrates address look-up engine, supporting 2K absolute MAC addresses
9K jumbo frame supports all speeds (10/100/1000Mbps)
Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 20-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port-1 to Port-8)
Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
Hardware;
9-inch desktop size, 1U height, rack mountable
LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
1 silent fan to provide stable and efficient power performance
Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
Hardware Specifications | |
---|---|
Copper Port | 10 10/100/1000BASE-T MDI/MDIX Ports |
PoE Injector Port | 8-port with 802.3af/at PoE injector function with Port-1 to Port-8 |
Switch Architecture | Store-and-Forward |
Switch Fabric | 20Gbps |
Switch Throughput@64 bytes | 13.4Mpps@64 bytes |
MAC Address Table | 2K entries, automatic source address learning and aging |
Maximum Frame Size | 9K bytes |
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
LED Indicators | System:
10/100/1000BASE-T RJ45 interfaces:
PoE interfaces:
|
DIP Switch | Selectable operation mode
|
Dimensions (W x D x H) | 220 x 150 x 43 mm (1U height) |
Enclosure | Metal |
Weight | 1205 g |
Power Requirements | AC 100~240V, 50/60Hz, 2.5A max. |
Power Consumption/ Dissipation | System On: Max. 4.1 watts/13.9 BTU PoE Full Loading: Max. 124 watts/423.1 BTU |
ESD Protection | Contact discharge of 6KV DC Air discharge of 8KV DC |
Thermal Fan | 1 |
Power over Ethernet | |
PoE Standard | IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type | End-span |
PoE Power Output | Per port 54V DC, 600mA. max. 32 watts |
Power Pin Assignment | 1/2 (+), 3/6 (-) |
PoE Power Budget | 120 watts |
Max. Number of Class 2 PDs | 8 |
Max. Number of Class 3 PDs | 8 |
Max. Number of Class 4 PDs | 4 |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3az Energy Efficient Ethernet (EEE) |
Environment | |
Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Hardware Specifications | |
---|---|
Copper Port | 10 10/100/1000BASE-T MDI/MDIX Ports |
PoE Injector Port | 8-port with 802.3af/at PoE injector function with Port-1 to Port-8 |
Switch Architecture | Store-and-Forward |
Switch Fabric | 20Gbps |
Switch Throughput@64 bytes | 13.4Mpps@64 bytes |
MAC Address Table | 2K entries, automatic source address learning and aging |
Maximum Frame Size | 9K bytes |
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
LED Indicators | System:
10/100/1000BASE-T RJ45 interfaces:
PoE interfaces:
|
DIP Switch | Selectable operation mode
|
Dimensions (W x D x H) | 220 x 150 x 43 mm (1U height) |
Enclosure | Metal |
Weight | 1205 g |
Power Requirements | AC 100~240V, 50/60Hz, 2.5A max. |
Power Consumption/ Dissipation | System On: Max. 4.1 watts/13.9 BTU PoE Full Loading: Max. 124 watts/423.1 BTU |
ESD Protection | Contact discharge of 6KV DC Air discharge of 8KV DC |
Thermal Fan | 1 |
Power over Ethernet | |
PoE Standard | IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type | End-span |
PoE Power Output | Per port 54V DC, 600mA. max. 32 watts |
Power Pin Assignment | 1/2 (+), 3/6 (-) |
PoE Power Budget | 120 watts |
Max. Number of Class 2 PDs | 8 |
Max. Number of Class 3 PDs | 8 |
Max. Number of Class 4 PDs | 4 |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3az Energy Efficient Ethernet (EEE) |
Environment | |
Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |