Power Pack SE Series / 6KVA UPS - Makelsan.
Features of the Makelsan PowerPack SE RT 6kVA,
Can be used universally as a 19-inch or as a stand-alone unit
High-frequency and continuous converter technology (online)
DSP - Digital Signal Processor
Power factor correction at input (PFC)
Extra wide input voltage range (110V-300V)
Power factor 0.9 at output
Cold start possible without mains feed-in
Automatic frequency adjustment
Particularly economical eco-mode adjustable (ECO)
Adjustable output voltage
Bypass function can be deactivated
Adjustable battery limits
Automatic diagnostics on power-on
Advanced Battery Management (ABM)
Protection against short circuit and overload
Automatic battery charging when switched off
Load-dependent fan control
RS232 port and RJ45 surge protection
Optional USB, SNMP and relay cards
Optional EPO function (emergency stop)
Optional battery extension
| Technical specifications of the PowerPack SE RT 6kVA | |
|---|---|
| Output power | 6000VA/ 5400W |
| UPS Technology | Online continuous transducer technology |
| Entrance | |
| Nominal voltage | 208V / 220V / 230V / 240VAC |
| Voltage range | At half load: 110-295VAC ±5%At full load: 145-295VAC ±5% |
| Band | 45-55 Hz ±0.5% or 55/65 Hz ±0.5% (auto-sensing) |
| Connection (electrical connection) | 1x IEC C14 |
| Power Factor | ≥ 0.99 |
| THDI | < 5% |
| Bypass voltage range | Depending on the output voltage -34V~+32V |
| Exit | |
| Nominal voltage | 208V / 210V / 220V / 230V / 240VAC adjustable via LCD |
| Output Power Factor | 0,9 |
| Voltage regulation | ±1 |
| Frequency (normal operation) | as at the input (synchronous to the input voltage) |
| Frequency (battery operation) | 50-60 Hz ±0.2Hz |
| Undulation | pure sine wave |
| Crest factor | 3:1 |
| Switchover time | Normal on battery operation = 0ms, normal operation on bypass operation <4ms |
| Overload capacity | 105% - 150%: Switch to bypass after 30s >150%: Switch to bypass after 100ms |
| Efficiency | |
| Normal | ≥92% |
| Battery | ≥90% |
| ECO Mudus | ≥98% |
| Battery | |
| DC Voltage | 192V |
| Battery Configuration | 16x 12V/9Ah |
| Battery Type | Maintenance-free lead gel batteries |
| Charging current | 1A (standard model); 6A (Long Time Model) |
| Recharge time | 8 hours on 90% battery capacity |
| Protector | |
| Protection | overload protection, fan test protection; AC L and N connection protection; Short circuit protection |
| Indicate | |
| LCD display | √ (yes) |
| Alarm | |
| Power failure at the input (battery operation) | Alarm sound every 4 seconds |
| Battery exhausted | Alarm sound every second |
| Overload | Double tone every second |
| Device Error | Continuous tone |
| Communication/ Management | |
| Interface | RS232 (standard); USB & SNMP card (optional) |
| Software for RS232 | for Windows 98/ 2000/ 2003/ XP/ Vista/ 2008/ Windows 7/ 8/ 10 |
| Software for USB (optional) | for Windows 98/ 2000/ 2003/ XP/ Vista/ 2008/ Windows 7/ 8/ 10 |
| SNMP (optional) | Power Management via SNMP Manager and Web Browser |
| Ambient conditions | |
| Operating temperature | 0°C to 40°C |
| Storage | -20°C to 55°C (without batteries) |
| Humidity | 0% to 90% relative humidity |
| Noise (at 1m) | ≤ 50dB |
| Physical characteristics | |
| Dimensions Long Time Model (WxDxH) | 440 x 565 x 132 mm |
| Dimensions standard model (WxDxH) | 440 x 565 x 132 mm |
| Dimensions battery extension (WxDxH) | 440 x 565 x 132 mm |
| Weight Long Time Model | 16.4 kg |
| Weight Standard Model | 19 kg |
| Weight battery extension | 52 kg |
| Technical specifications of the PowerPack SE RT 6kVA | |
|---|---|
| Output power | 6000VA/ 5400W |
| UPS Technology | Online continuous transducer technology |
| Entrance | |
| Nominal voltage | 208V / 220V / 230V / 240VAC |
| Voltage range | At half load: 110-295VAC ±5%At full load: 145-295VAC ±5% |
| Band | 45-55 Hz ±0.5% or 55/65 Hz ±0.5% (auto-sensing) |
| Connection (electrical connection) | 1x IEC C14 |
| Power Factor | ≥ 0.99 |
| THDI | < 5% |
| Bypass voltage range | Depending on the output voltage -34V~+32V |
| Exit | |
| Nominal voltage | 208V / 210V / 220V / 230V / 240VAC adjustable via LCD |
| Output Power Factor | 0,9 |
| Voltage regulation | ±1 |
| Frequency (normal operation) | as at the input (synchronous to the input voltage) |
| Frequency (battery operation) | 50-60 Hz ±0.2Hz |
| Undulation | pure sine wave |
| Crest factor | 3:1 |
| Switchover time | Normal on battery operation = 0ms, normal operation on bypass operation <4ms |
| Overload capacity | 105% - 150%: Switch to bypass after 30s >150%: Switch to bypass after 100ms |
| Efficiency | |
| Normal | ≥92% |
| Battery | ≥90% |
| ECO Mudus | ≥98% |
| Battery | |
| DC Voltage | 192V |
| Battery Configuration | 16x 12V/9Ah |
| Battery Type | Maintenance-free lead gel batteries |
| Charging current | 1A (standard model); 6A (Long Time Model) |
| Recharge time | 8 hours on 90% battery capacity |
| Protector | |
| Protection | overload protection, fan test protection; AC L and N connection protection; Short circuit protection |
| Indicate | |
| LCD display | √ (yes) |
| Alarm | |
| Power failure at the input (battery operation) | Alarm sound every 4 seconds |
| Battery exhausted | Alarm sound every second |
| Overload | Double tone every second |
| Device Error | Continuous tone |
| Communication/ Management | |
| Interface | RS232 (standard); USB & SNMP card (optional) |
| Software for RS232 | for Windows 98/ 2000/ 2003/ XP/ Vista/ 2008/ Windows 7/ 8/ 10 |
| Software for USB (optional) | for Windows 98/ 2000/ 2003/ XP/ Vista/ 2008/ Windows 7/ 8/ 10 |
| SNMP (optional) | Power Management via SNMP Manager and Web Browser |
| Ambient conditions | |
| Operating temperature | 0°C to 40°C |
| Storage | -20°C to 55°C (without batteries) |
| Humidity | 0% to 90% relative humidity |
| Noise (at 1m) | ≤ 50dB |
| Physical characteristics | |
| Dimensions Long Time Model (WxDxH) | 440 x 565 x 132 mm |
| Dimensions standard model (WxDxH) | 440 x 565 x 132 mm |
| Dimensions battery extension (WxDxH) | 440 x 565 x 132 mm |
| Weight Long Time Model | 16.4 kg |
| Weight Standard Model | 19 kg |
| Weight battery extension | 52 kg |
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Once the user has seen at least one product this snippet will be visible.