Plannet/24-Port/(10/100/1000T)/802.3at PoE + 4-Port Gigabit TP/SFP Combo/Managed Switch

https://tamyeez.odoo.com/web/image/product.template/9503/image_1920?unique=e77f51d

1,955.00 QR 1955.0 QAR 1,955.00 QR

1,955.00 QR


    هذه التركيبة غير موجودة.

    Add to Cart


    Share this product:
    24-Port (10/100/1000T) 802.3at PoE + 4-Port Gigabit TP/SFP Combo/Managed Switch - Planet GS-4210-24P4C.

    Physical Port:

    28-Port 10/100/1000BASE-T Gigabit RJ45 copper with 24-Port IEEE 802.3at/af PoE Injector (Port-1 to Port-24)
    4 100/1000BASE-X SFP slots, shared with port-25 to port-28 compatible with 100BASE-FX SFP
    RJ45 console interface for switch basic management and setup
    Reset button for system factory default and reboot
     

    Switching:

    Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X
    Features Store-and-Forward mode with wire-speed filtering and forwarding rates
    IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
    10K jumbo frame
    Automatic address learning and address aging
    Supports CSMA/CD protocol
     

    Power over Ethernet:

    Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
    Backward compatible with IEEE 802.3af Power over Ethernet
    Up to 24 ports of IEEE 802.3af/802.3at devices powered
    Supports PoE power up to 30 watts for each PoE port
    280-watt PoE budget for GS-4210-24P4C
    430-watt PoE budget for GS-4210-24PL4C
    Auto detects powered device (PD)
    Circuit protection prevents power interference between ports
    Remote power feeding up to 100 meters in standard mode and 250m in extend mode
    PoE management
    Total PoE power budget control
    Per port PoE function enable/disable
    PoE Port Power feeding priority
    Per PoE port power limitation
    PoE delay 
    PD classification detection
    Intelligent PoE features
    PD alive check
    PoE schedule
    PoE extension
    Layer 2 Features

    Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
    High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
    Supports VLAN
    IEEE 802.1Q tagged VLAN
    Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    Protocol VLAN
    Voice VLAN
    Private VLAN
    Management VLAN
    GVRP
    Supports Spanning Tree Protocol
    STP (Spanning Tree Protocol)
    RSTP (Rapid Spanning Tree Protocol)
    MSTP (Multiple Spanning Tree Protocol)
    STP BPDU Guard, BPDU Filtering and BPDU Forwarding
    Supports Link Aggregation
    IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    Cisco ether-channel (Static Trunk)
    Provides port mirror (many-to-1)
    Loop protection to avoid broadcast loops
    Supports ERPS (Ethernet Ring Protection Switching)
     

    Quality of Service:

    Ingress/Egress Rate Limit per port bandwidth control
    Storm Control support
    Broadcast/Unknown-Unicast/Unknown-Multicast
    Traffic classification
    IEEE 802.1p CoS
    TOS/DSCP/IP Precedence of IPv4/IPv6 packets
    Strict priority and Weighted Round Robin (WRR) CoS policies
     

    Multicast:

    Supports IPv4 IGMP snooping v2 and v3
    Supports IPv6 MLD snooping v1, v2
    IGMP querier mode support
    IGMP snooping port filtering
    MLD snooping port filtering
     

    Security:

    Authentication
    IEEE 802.1X Port-based network access authentication
    Built-in RADIUS client to cooperate with the RADIUS servers
    DHCP Option 82
    RADIUS/TACACS+ login user access authentication
    Access Control List
    IPv4/IPv6 IP-based ACL
    IPv4/IPv6 IP-based ACE
    MAC-based ACL
    MAC-based ACE
    MAC Security
    Static MAC
    MAC Filtering
    Port Security for Source MAC address entries filtering
    DHCP Snooping to filter distrusted DHCP messages
    Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
    IP Source Guard prevents IP spoofing attacks
    DoS Attack Prevention
     

    Management:

    IPv4 and IPv6 dual stack management
    Switch Management Interface
    Web switch management 
    Console/Telnet Command Line Interface
    SNMP v1 and v2c switch management
    SSHv2, TLSv1.2 and SNMP v3 secure access
    SNMP Management
    Four RMON groups (history, statistics, alarms, and events) 
    SNMP trap for interface Link Up and Link Down notification
    User Privilege Levels Control
    Built-in Trivial File Transfer Protocol (TFTP) client
    BOOTP and DHCP for IP address assignment
    System Maintenance
    Firmware upload/download via HTTP/TFTP
    Configuration upload / download through Web interface
    Dual Images
    Hardware reset button for system reboot or reset to factory default
    SNTP Network Time Protocol
    Network Diagnostic
    ICMPv6/ICMPv4 Remote Ping
    Cable Diagnostics
    SFP-DDM (Digital Diagnostic Monitor)
    Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
    Event message logging to remote Syslog server
    PLANET Smart Discovery Utility for deployment management
    PLANET NMS system and CloudViewer for deployment management

    Hardware Specifications
    Copper Ports28 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
    PoE Injector Port24 ports with 802.3at/af PoE injector function with Port-1 to Port-24
    SFP/mini-GBIC Slots4 x 100/1000BASE-X SFP interfaces with Port-25 to Port-28
    Supports 100/1000Mbps dual mode and DDM
    Console1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)
    Reset Button< 5 sec: System reboot
    > 5 sec: Factory default
    Fan3 fans
    Dimensions (W x D x H)GS-4210-24P4C:
    441 x 207 x 44 mm, 19-inch, 1U height
    GS-4210-24PL4C:
    441 x 330 x 44 mm, 19-inch, 1U height
    WeightGS-4210-24P4C:
    2.9kg
    GS-4210-24PL4C:
    4.6kg
    EnclosureMetal
    Power RequirementsAC 100~240V, 50/60Hz, auto-sensing
    Power Consumption / DissipationGS-4210-24P4C:
    333 watts (max.)/ 1136 BTU
    GS-4210-24PL4C:
    505 watts (max.)/ 1723 BTU
    LEDSystem:
    PWR x 1(Green)
    SYS x 1 (Green)
    Per PoE Port (Port 1 to Port 24):
    1000 LNK/ACT (Green) & 10/100 LNK/ACT x 1 (Amber)
    PoE-in-use x 1 (Amber)
    Per Gigabit RJ45 Port (Port 25 to Port 28):
    1000 LNK/ACT (Green) & 10/100 LNK/ACT x 1 (Amber)
    Per Gigabit SFP Port (Port 25 to Port 28):
    1000 LNK/ACT (Green) & 100 LNK/ACT x 1 (Amber)
    Switching
    SwitchStore-and-Forward
    Switch Fabric56Gbps/non-blocking
    Switch Throughput@64Bytes41.67Mpps
    Address Table8K entries
    Flow ControlIEEE 802.3x pause frame for full duplex
    Back pressure for half duplex
    Power over Ethernet
    PoE StandardIEEE 802.3af/802.3at PoE/PSE
    PoE Power Supply TypeEnd-span
    PoE Power OutputPer Port 54V DC, 300mA. Max. 15.4 watts (IEEE 802.3af)
    Per Port 54V DC, 600mA. Max. 30 watts (IEEE 802.3at)
    Power Pin Assignment1/2(+), 3/6(-)
    PoE Power BudgetGS-4210-24P4C:
    280 watts (max.)
    GS-4210-24PL4C:
    430 watts (max.)
    Number of 802.3af PDsGS-4210-24P4C:
    18 units
    GS-4210-24PL4C:
    24 units
    Number of 802.3at PDsGS-4210-24P4C:
    9 units
    GS-4210-24PL4C:
    14 units
    PoE ManagementPD Alive Check
    Scheduled Power Recycling
    PoE Schedule
    PoE Usage Monitoring
    PoE Extension
    Layer 2 Functions
    Port MirroringTX/RX/both
    Many-to-1 monitor
    VLAN802.1Q tag-based VLAN
    Up to 256 VLAN groups, out of 4094 VLAN IDs
    802.1ad Q-in-Q tunneling
    Voice VLAN
    Protocol VLAN
    Private VLAN (Protected port)
    GVRP
    Link AggregationIEEE 802.3ad LACP/Static Trunk
    Spanning Tree ProtocolSTP, IEEE 802.1D Spanning Tree Protocol
    RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
    STP BPDU Guard, BPDU Filtering and BPDU Forwarding
    IGMP SnoopingIPv4 IGMP (v2/v3) Snooping
    IPv4 IGMP Querier
    Up to 256 multicast groups
    MLD SnoopingIPv6 MLD (v1/v2) Snooping, up to 256 multicast groups
    QoS8 mapping IDs to 8 level priority queues
     Port number
     802.1p priority
     DSCP/IP precedence of IPv4/IPv6 packets
    Traffic classification based, strict priority and WRR
    Ingress/Egress Rate Limit per port bandwidth control
    RingSupports ERPS, and complies with ITU-T G.8032
    Recovery time < 450ms
    Security Functions
    Access Control ListIPv4/IPv6 IP-based ACL/MAC-based ACL
    Up to 256 ACL entries
    Port SecurityIEEE 802.1X – Port-based authentication
    Built-in RADIUS client to co-operate with RADIUS server
    RADIUS/TACACS+ user access authentication
    MAC SecurityIP-MAC port binding
    MAC filter
    Static MAC address
    Enhanced SecurityDHCP Snooping and DHCP Option82
    STP BPDU guard, BPDU filtering and BPDU forwarding
    DoS attack prevention
    ARP inspection
    IP source guard
    Management Functions
    Basic Management InterfacesRS232 to RJ45 Console
    Web browser
    Telnet
    SNMP v1, v2c
    Secure Management InterfacesSSHv2, TLS v1.2, SNMP v3
    System ManagementFirmware upgrade by HTTP/TFTP protocol through Ethernet network
    LLDP protocol
    SNTP
    PLANET Smart Discovery Utility
    PLANET NMS System/CloudViewer
    Event ManagementRemote/Local Syslog
    System log
    SNMP MIBsRFC 1213 MIB-II
    RFC 1215 Generic Traps
    RFC 1493 Bridge MIB
    RFC 2674 Bridge MIB Extensions
    RFC 2737 Entity MIB (Version 2)
    RFC 2819 RMON (1, 2, 3, 9)
    RFC 2863 Interface Group MIB
    RFC 3635 Ethernet-like MIB
    RFC 3621 Power Ethernet MIB
    LLDP MIB
    Standards Conformance
    Regulatory ComplianceFCC Part 15 Class A, CE
    Standards ComplianceIEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3z Gigabit SX/LX
    IEEE 802.3ab Gigabit 1000T
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree protocol
    IEEE 802.1w Rapid Spanning Tree protocol
    IEEE 802.1s Multiple Spanning Tree protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet Plus
    RFC 768 UDP
    RFC 783 TFTP
    RFC 793 TCP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    RFC 3810 MLD version 2
    ITU G.8032 ERPS Ring
    Environment
    OperatingTemperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
    StorageTemperature: -20 ~ 70 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Hardware Specifications
    Copper Ports28 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
    PoE Injector Port24 ports with 802.3at/af PoE injector function with Port-1 to Port-24
    SFP/mini-GBIC Slots4 x 100/1000BASE-X SFP interfaces with Port-25 to Port-28
    Supports 100/1000Mbps dual mode and DDM
    Console1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)
    Reset Button< 5 sec: System reboot
    > 5 sec: Factory default
    Fan3 fans
    Dimensions (W x D x H)GS-4210-24P4C:
    441 x 207 x 44 mm, 19-inch, 1U height
    GS-4210-24PL4C:
    441 x 330 x 44 mm, 19-inch, 1U height
    WeightGS-4210-24P4C:
    2.9kg
    GS-4210-24PL4C:
    4.6kg
    EnclosureMetal
    Power RequirementsAC 100~240V, 50/60Hz, auto-sensing
    Power Consumption / DissipationGS-4210-24P4C:
    333 watts (max.)/ 1136 BTU
    GS-4210-24PL4C:
    505 watts (max.)/ 1723 BTU
    LEDSystem:
    PWR x 1(Green)
    SYS x 1 (Green)
    Per PoE Port (Port 1 to Port 24):
    1000 LNK/ACT (Green) & 10/100 LNK/ACT x 1 (Amber)
    PoE-in-use x 1 (Amber)
    Per Gigabit RJ45 Port (Port 25 to Port 28):
    1000 LNK/ACT (Green) & 10/100 LNK/ACT x 1 (Amber)
    Per Gigabit SFP Port (Port 25 to Port 28):
    1000 LNK/ACT (Green) & 100 LNK/ACT x 1 (Amber)
    Switching
    SwitchStore-and-Forward
    Switch Fabric56Gbps/non-blocking
    Switch Throughput@64Bytes41.67Mpps
    Address Table8K entries
    Flow ControlIEEE 802.3x pause frame for full duplex
    Back pressure for half duplex
    Power over Ethernet
    PoE StandardIEEE 802.3af/802.3at PoE/PSE
    PoE Power Supply TypeEnd-span
    PoE Power OutputPer Port 54V DC, 300mA. Max. 15.4 watts (IEEE 802.3af)
    Per Port 54V DC, 600mA. Max. 30 watts (IEEE 802.3at)
    Power Pin Assignment1/2(+), 3/6(-)
    PoE Power BudgetGS-4210-24P4C:
    280 watts (max.)
    GS-4210-24PL4C:
    430 watts (max.)
    Number of 802.3af PDsGS-4210-24P4C:
    18 units
    GS-4210-24PL4C:
    24 units
    Number of 802.3at PDsGS-4210-24P4C:
    9 units
    GS-4210-24PL4C:
    14 units
    PoE ManagementPD Alive Check
    Scheduled Power Recycling
    PoE Schedule
    PoE Usage Monitoring
    PoE Extension
    Layer 2 Functions
    Port MirroringTX/RX/both
    Many-to-1 monitor
    VLAN802.1Q tag-based VLAN
    Up to 256 VLAN groups, out of 4094 VLAN IDs
    802.1ad Q-in-Q tunneling
    Voice VLAN
    Protocol VLAN
    Private VLAN (Protected port)
    GVRP
    Link AggregationIEEE 802.3ad LACP/Static Trunk
    Spanning Tree ProtocolSTP, IEEE 802.1D Spanning Tree Protocol
    RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
    STP BPDU Guard, BPDU Filtering and BPDU Forwarding
    IGMP SnoopingIPv4 IGMP (v2/v3) Snooping
    IPv4 IGMP Querier
    Up to 256 multicast groups
    MLD SnoopingIPv6 MLD (v1/v2) Snooping, up to 256 multicast groups
    QoS8 mapping IDs to 8 level priority queues
     Port number
     802.1p priority
     DSCP/IP precedence of IPv4/IPv6 packets
    Traffic classification based, strict priority and WRR
    Ingress/Egress Rate Limit per port bandwidth control
    RingSupports ERPS, and complies with ITU-T G.8032
    Recovery time < 450ms
    Security Functions
    Access Control ListIPv4/IPv6 IP-based ACL/MAC-based ACL
    Up to 256 ACL entries
    Port SecurityIEEE 802.1X – Port-based authentication
    Built-in RADIUS client to co-operate with RADIUS server
    RADIUS/TACACS+ user access authentication
    MAC SecurityIP-MAC port binding
    MAC filter
    Static MAC address
    Enhanced SecurityDHCP Snooping and DHCP Option82
    STP BPDU guard, BPDU filtering and BPDU forwarding
    DoS attack prevention
    ARP inspection
    IP source guard
    Management Functions
    Basic Management InterfacesRS232 to RJ45 Console
    Web browser
    Telnet
    SNMP v1, v2c
    Secure Management InterfacesSSHv2, TLS v1.2, SNMP v3
    System ManagementFirmware upgrade by HTTP/TFTP protocol through Ethernet network
    LLDP protocol
    SNTP
    PLANET Smart Discovery Utility
    PLANET NMS System/CloudViewer
    Event ManagementRemote/Local Syslog
    System log
    SNMP MIBsRFC 1213 MIB-II
    RFC 1215 Generic Traps
    RFC 1493 Bridge MIB
    RFC 2674 Bridge MIB Extensions
    RFC 2737 Entity MIB (Version 2)
    RFC 2819 RMON (1, 2, 3, 9)
    RFC 2863 Interface Group MIB
    RFC 3635 Ethernet-like MIB
    RFC 3621 Power Ethernet MIB
    LLDP MIB
    Standards Conformance
    Regulatory ComplianceFCC Part 15 Class A, CE
    Standards ComplianceIEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3z Gigabit SX/LX
    IEEE 802.3ab Gigabit 1000T
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree protocol
    IEEE 802.1w Rapid Spanning Tree protocol
    IEEE 802.1s Multiple Spanning Tree protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet Plus
    RFC 768 UDP
    RFC 783 TFTP
    RFC 793 TCP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    RFC 3810 MLD version 2
    ITU G.8032 ERPS Ring
    Environment
    OperatingTemperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
    StorageTemperature: -20 ~ 70 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.  

    Recently viewed Products