Simplex/Smoke Detector/Addressable - 4098-9714.
TrueAlarm photoelectric sensors use a stable, pulsed LED light source and a silicon photodiode receiver to deliver consistent and accurate low power smoke sensing. Three user selectable sensitivities for special applications are available for each individual sensor, 0.2%, 0.5%, and 1% per foot. Standard sensitivity is 1.25% to 3.1% per foot. The fire alarm control panel runs an algorithm that can vary the sensitivity for normal applications between 1.25% and 3.1% per foot.
Note: Fixed sensitivity settings higher than 1.0% per foot are not UL268 7th Edition compliant.
The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow.
Features:
Sealed against rear air flow entry.
Interchangeable mounting.
EMI/RFI shielded electronics.
Photoelectric technology sensing.
360° smoke entry for optimum response.
Built-in insect screens.
Weight | 0.50 lbs |
---|---|
Dimensions | 4.875 × 4.875 × 2.125 in |
Manufacturer | |
Brand | |
Condition | |
Type | |
Style | |
Detectable Medium | |
Detection Method | |
Programming | |
Protocol | |
Voltage | |
Voltage Range | |
Series |
Weight | 0.50 lbs |
---|---|
Dimensions | 4.875 × 4.875 × 2.125 in |
Manufacturer | |
Brand | |
Condition | |
Type | |
Style | |
Detectable Medium | |
Detection Method | |
Programming | |
Protocol | |
Voltage | |
Voltage Range | |
Series |
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Once the user has seen at least one product this snippet will be visible.